Hinge Overview  |  Overlay Hinges  |  Overlay Hinge Specials  |  Lipped Hinges  |  Flush Hinges
Butt Hinges  |  Furniture Hinges  |  Pulls  |  Gravity Lock  |  Wire Doors  |  Wire Door Hardware
Wire Doors

RPC wire doors are suitable for music room, instrument and uniform storage as well as other commercial applications. Choose from RPC's wide selection of standard size wire doors. We can also supply doors to meet your custom size requirements. RPC can match your standard or custom color choice using a durable powder coat finish.

The doorframe wire is 5/16" in diameter. Vertical door wires are 3/16" in diameter and have beveled ends to produce a clean, finished look.

Wire doors are supplied complete with 5-knuckle hinges, a hasp welded to the doorframe and a label holder welded to the vertical wires. A mating Cabinet Hasp - Inset (No. 2102) is included with each door. A No. 2103 Cabinet Hasp - Onset, may be substituted for use in onset applications.

PDFDownload Wire Door PDF Only
PDFDownload Complete Casework Hardware Catalog

Stay Close Wire Door Latch

RPC now offers an enhanced stay close wire door latch option. The cabinet latch and door strike are constructed of 13 gage steel and are available in a bright chrome finish. This system allows the doors to be used in either a right or left hand application. The contour of the latch allows it to travel over the hasp until it falls into a positive locked position. This latching arrangement is available for both solid and wire grille doors. For security, the door can be locked with a padlock.

Ordering Information: To order wire doors with the Stay Close latch feature, add an "S" after the standard wire door part number (i.e., No. 2022S). The mating latch (left or right handed) will be included in your order.

  Typical wire door cabinet dimension and design configuration are shown below. Contact RPC application engineering with your
  questions or your special requirements.


  Applications for STANDARD WIRE DOORS

  *If the inside compartment opening is greater than 36-9/16" (928.6mm) in width, two doors will be required, or if
  double compartment doors are desired, calculate the door width as follows: Inside compartment opening minus
  27/32" (21.4mm) divided by 2.

Contract Manufacturing :: Institutional Casework Hardware :: Hinge Glossary
About RPC :: Contact Us :: Employment :: Information and Terms

Rockford Process Control • 2020 Seventh Street • Rockford, IL 61104
ph: 815.966.2000 • fax: 815.966.2026

© Rockford Process Control All Rights Reserved